Basic Info.
Product Description
The following data are only typical data for the product. The product is subject to the final analysis.
Thermal oil
Product Name: DBT Heat Transfer Fluid
CAS NO.: 26898-17-9
JINTHERM 602 is a high-performance synthetic, organic heat-transfer medium for use in the liquid phase in closed, forced circulation heat-transfer systems. It can be used below 370ºC/698ºF(its max film temperature) in the liquid phase circulation system (330ºC/626ºF is recommended as the max using temperature under normal pressure).
JINTHERM 602 is most suitable for indirect heating of reactors, polymerization vessels and distillation columns, of processing machines and driers, and heat ex-changers in process plants and systems for heat recovery. JINTHERM 602 is also suitable for cooling systems.
JINTHERM 602 circuits are advantageously operated using an inert gas back pressure of less than 100 mbar at the expansion vessel. Nitrogen has proven to be a suitable inert gas. Inert gas coverage can be used to protect against oxidation boiling at high temperatures and moisture absorption at low temperatures. Antioxidants are unstable at operating temperatures above 200°C/392ºF and are ineffective even after short operating times.
JINTHERM 602 is thermally stable up to very high operating temperatures. The JINTHERM 602 charge can be used for several years without significant changes. At very high temperatures, low- boiling and high-boiling decomposition products may be formed. Their degree of formation rises with increasing operating temperatures. The decomposition products remain completely dissolved in the JINTHERM 602 charge.
To check the operating condition of heat-transfer systems, quality controls should be carried out at appropriate intervals on representative samples from the main stream of the circuit. Scope of testing and sampling must be individually matched to the charge volume and the operating temperature of the heat-transfer plant.
Company Profile
The company was established in 2002 and is located in Jining, Shandong, known as the hometown of Confucius and Mencius in China. It has been deeply engaged in the lubricating oil industry for 23 years and is a large-scale lubricating oil production base with significant domestic influence and relatively large scale.
The company has domestic advanced production equipment and automated production lines. The annual production capacity is 180,000 tons, the base oil storage capacity is 50,000 tons, the production workshop covers an area of 25,000 square meters, and there are 260 oil tanks. Can meet the large-scale and continuous oil demand of enterprises.
The company has a number of national patents and qualification certifications. It has a professional R&D team, which can continuously carry out technological innovation, optimize product formulas, improve product performance, and ensure that the company's products always maintain the industry-leading level.
The company has independent laboratories and testing equipment, and has established a strict quality control system. From the procurement of raw materials to the delivery of finished products, strict inspections and monitoring are carried out at every stage. All products meet or exceed national and industry standards.
Q1: Are you a trading company or a manufacturer?
A: We are a professional lubricant manufacturer with 23 years of industry experience. Our factory is located in Jining, Shandong, the hometown of Confucius and Mencius in China.
Q2: What's the delivery time?
A: The delivery time is approximately 10 days after the down payment is made. The specific delivery time depends on the products and quantities of the order.
Q3: What are your payment terms?
A: According to our sales policy, we require a 30% - 40% telegraphic transfer in advance, and 60% - 70% of the balance should be completed before shipment. We can provide real photos or videos of the goods before the balance is paid.
Q4: What are your delivery terms?
A: FOB, CFR, CIF or EXW.
Q5: What's your packaging like?
A: Usually, it's in 200L metal drums, PE bags, cans, or drums of different sizes. It depends on your product requirements. We'll do our best to meet customers' requirements.
Q6: Can I get some samples from you?
A: Certainly. We'll provide free samples, but you need to pay for the freight.
Q7: Can you provide ODM or OEM?
A: We can. We can cooperate in this way to meet the requirements of the order. If necessary, please provide samples, which will help us conduct tests.
Q8: How do you control the product quality?
A: The company has independent laboratories and testing equipment and has established a strict quality control system. From the procurement of raw materials to the delivery of finished products, strict inspections and monitoring are carried out at every stage. All products meet or exceed national and industry standards.
Q9: How do you ensure our long-term business relationship?
A: We have a professional sales and service team that can provide you with timely and accurate technical support and solutions. Whether you have problems in product selection, during the use process, or need to customize lubricant products with special specifications, we will serve you wholeheartedly.
Our promise
Audited Supplier 
Product Description
){kind=link}